Many shipments of time and temperature sensitive products including food, pharmaceutical,medical devices, vaccines, and industrial chemicals such as chemical-mechanical planarization (CMP) slurries, adhesives, and sealants contain, or have attached to the package(s) and/or overpack(s) small battery-powered tracking devices / data loggers. Most of these devices use lithium metal or lithium ion cells or batteries as a power source.
Lithium cells and batteries are classified as dangerous goods and therefore must meet all of the applicable provisions of the Dangerous Goods Regulations (DGR) when shipped by air. This applies regardless of whether the lithium cells or batteries are shipped as cargo in their own right or whether the lithium cells or batteries are installed in a small device such as a data logger that is placed inside or attached to packages of cargo. In addition, to be permitted in transport all lithium cell and battery types must have passed the applicable tests set out in Subsection 38.3 of the UN Manual of Tests and Criteria.
The purpose of this document is to provide guidance on:
1. complying with provisions applicable to the transport by air of lithium batteries as set out inthe DGR when lithium battery powered data loggers are contained in cargo; and
2. recommendations with respect to the use of battery-powered devices that are active during transport. The recommendations for active devices are taken from FAA Advisory Circular AC 21.91-1C, primarily the recommendations in Section 8 of the AC, which relate to active devices carried in the aircraft cargo compartment.
This document is based on the provisions set out in the 2017-2018 Edition of the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air (Technical Instructions) and the 58th Edition of the IATA DGR, Section II of Packing Instructions (PI) 967 and PI 970.
The provisions of the DGR with respect to lithium batteries may also be found in the IATA Lithium Battery Shipping Guidelines (LBSG). In addition to the content from the DGR, the LBSG also has additional classification flowcharts and detailed packing and documentation examples for lithium batteries.
Information on the DGR and LBSG can be found here:
REQUIREMENTS FOR LITHIUM CELLS AND BATTERIES
The extent to which the lithium cells or batteries are regulated as dangerous goods depends on:
(a) the lithium metal content for lithium metal cells or batteries; or
(b) the Watt-hour (Wh) rating for lithium ion cells or batteries.
Fully Regulated Lithium Batteries
Lithium metal cells with a lithium metal content exceeding 1 g and lithium metal batteries with a lithium metal content exceeding 2 g.
Lithium ion cells with a Watt-hour rating exceeding 20 Wh and lithium ion batteries with a Watt-hour rating exceeding 100 Wh.
Devices that contain fully regulated lithium cells or batteries are subject to all of the provisions of the DGR, which includes:
(a) dangerous goods training. All persons involved in the preparation and shipping must have completed appropriate dangerous goods training and must attend recurrent dangerous goods training at intervals not exceeding 24 months;
(b) marks and labels on packages. All packages must be marked with the name and address of the shipper and consignee, the UN number and proper shipping name. Packages must also bear the Class 9 lithium battery hazard label, except that until 31 December 2018 the standard Class 9 miscellaneous hazard label may be used;
(c) documentation. The consignment must be correctly described on a Shipper’s Declaration for Dangerous Goods.
Excepted Lithium Batteries
Where the lithium cells or batteries have a lithium metal content of 1 g or less for cells or 2 g or less for batteries or for lithium ion the cells have a Watt-hour rating of 20 Wh or less or batteries are 100 Wh or less, then they are not subject to all of the provisions of the DGR.
Lithium cells or batteries that fit within these limits are subject to Section II of the applicable lithium battery packing instructions in the DGR. Each package that contains such cells or batteries, including those installed in devices, must not contain more than 5 kg net weight of lithium cells or batteries.
Cargo Tracking Devices/Data Loggers Containing Excepted Lithium cells or Batteries
Packages containing lithium batteries installed in equipment such as a data logger must bear the lithium battery mark as shown in Figure 7.1.C of the IATA DGR, see Figure 1. The border of the label must have red diagonal hatchings 5 mm in width with text and symbols in black on a white or contrasting background. The lithium battery mark may be printed directly on the outer packaging provided that there is sufficient contrast between the elements of the lithium battery mark and the colour of the packaging material. The minimum dimensions are 120 mm wide x 110 mm high.
1. the lithium battery mark is not required on packages where the data loggers are powered by only button (coin) cells (regardless of the quantity of data loggers in a particular package or the number of packages in a consignment);
2. the lithium battery mark is not required on packages where there are no more than 4 cells or 2 batteries contained in equipment in each package and there are no more than two packages in the consignment.
This means that if the cargo tracking device or data logger is powered by other than lithium button (coin) cells and there are more than two packages containing tracking devices/data loggers, then the lithium battery mark must be applies to all packages in the consignment that contain tracking devices/data loggers.
Figure 1 – Lithium Battery Mark
* Place for UN number(s), i.e. UN 3090, UN 3091, UN 3480 and/or UN 3481, as applicable
** Place for telephone number
The lithium battery handling label as shown in the 57th edition of the DGR, see Figure 2, may continue to be used until 31 December 2018.
Figure 2 – Lithium Battery Handling Label
* Place for “Lithium ion battery” and/or “Lithium metal battery”
Where the packages are of dimensions such that they cannot bear the full size lithium battery mark, the mark dimensions may be reduced to 105 mm wide × 74 mm high. The design specifications otherwise remain the same.
The telephone number on the lithium battery mark (or lithium battery handling label) should be that of a person knowledgeable about the shipment but is not intended to be for the purposes of obtaining immediate emergency response guidance, and is therefore not required to be monitored at all times while the package is in transit. It is acceptable for the number to be monitored during the company’s normal business hours in order to provide product-specific information relative to the shipment. However, it also is acceptable to use an emergency response, 24-hour phone number on the lithium battery mark.
Where a consignment includes packages bearing the lithium battery mark, the words “Lithium ion batteries in compliance with Section II of PI 967” or “Lithium metal batteries in compliance with Section II of PI 970”, as applicable must be included on the air waybill, when an air waybill is used. The information should be shown in the “Nature and Quantity of Goods” box of the air waybill.
A Shipper’s Declaration for Dangerous Goods is not required.
Shippers of excepted lithium batteries are not subject to the formal dangerous goods training requirements set out in DGR 1.5, however, persons preparing such shipments must be provided with “adequate instruction” as described in DGR 1.6.
The following is offered as a starting point for an employer on what could be considered as being adequate instruction:
1. The employer must identify the different configurations of lithium batteries that they ship, i.e. lithium batteries and/or lithium batteries packed with equipment and/or lithium batteries contained in equipment; lithium metal batteries and/or lithium ion batteries.
2. The employer must document the procedures that apply to the configurations and battery types that they ship as determined in 1, above.
3. The procedures should be written up as a clear work instructions or other form of information that is available to all employees responsible for the preparation of lithium battery shipments.
4. All employees that are involved in the process of preparing lithium battery shipments must be taken through the procedure to ensure that they understand and can demonstrate the correct application of documented procedures for the packing, labelling, marking and documentations requirements, as applicable to their job function.
5. A record must be maintained that identifies each applicable employee and the date(s) that this instruction was provided.
6. Employees should be given periodic refresher, or at least demonstrate that they remain “adequately” instructed on how to perform the task. This should be done at least every two years or whenever the procedure is revised, or regulations are changed, whichever is sooner.
7. Companies that are involved in reverse logistics, i.e. arranging for returns of lithium batteries, lithium batteries packed with equipment or lithium batteries contained in equipment must develop a clear instruction for consumers on the process to be followed for returning products. This instruction must include packaging materials and lithium battery marks, as necessary. The instruction must also include the transport method and mode of transport to be followed; this must include a clear statement on applicable prohibitions.
RECOMMENDATIONS ON SHIPPING ACTIVE DEVICES
Portable electronic devices (PED) such as data loggers and cargo tracking devices, that are designed to remain active throughout their entire transport from the shipper to the consignee, including when on board an aircraft, have the potential to interfere with aircraft navigation or communication systems.
Therefore, manufacturers of PED, users of PED and the operator (airline) are only permitted to place in or attach to cargo and to carry PED that the operator of the aircraft has determined will not interfere with the safe operation of that aircraft. The recommendations set out in this document are one means, but not the only means, of complying with the applicable operational regulations pertaining to the operation of PED.
This section applies to PED that are designed for use on aircraft in locations inaccessible to the flight crew during flight. Because this class of PED cannot be turned off manually in the event of an emergency, the device manufacturers and aircraft operators must ensure certain design and operational considerations are addressed. The operator must ensure that these PED meet the following criteria prior to allowing use on aircraft:
1. the cargo tracking device/data logger meets the RF radiated emissions limits defined in RTCA/DO-160, Environmental Conditions and Test Procedures for Airborne Equipment, Section 21, Category H during all modes of operation. Testing of the device must include any peripheral devices that will be used with the device during normal operations. Typically, peripherals include external sensors or associated wiring. For additional Guidance, refer to RTCA/DO-357, User Guide: Supplement to DO-160G.
2. the device is designed with a minimum of two independent means to turn off completely, turn off cellular or mobile functions, or a combination of both when airborne. These independent methods must use different sources to identify flight. For example, a cargo tracking device designed to sense rapid altitude changes and acceleration to turn off cellular transmissions is an acceptable design feature that meets the requirement. Redundant sources of the same information, such as two vertical accelerometers, would not be an acceptable design.
3. the device manufacturer substantiated data includes:
(a) pictures of the device and any peripherals,
(b) product label,
(c) operational description of device and peripherals,
(d) manufacturer statement of strict design and production controls, and
(e) if device contains a lithium battery, battery design standard and relevant battery qualification documentation (e.g., TSO-C142a, Non-Rechargeable Lithium Cells or Batteries, dated August 7, 2006, approval; RTCA/DO-311, Minimum Operational Performance Standards for Rechargeable Lithium Battery Systems, dated March 13, 2008, qualification report, maintenance requirements and process and procedures to address the movement of defective devices, including damaged or defective batteries).
4. the device must not be capable of generating a dangerous evolution of heat.
5. the device must not be capable of emitting disturbing signals, such as buzzing alarms or strobe lights, during transport.
Manufacturers of cargo tracking devices/data loggers should undertake all of the required testing of their devices so that they can satisfy the aircraft operator that the devices comply with the recommendations above. It is recommended that the device manufacturers coordinate with the aircraft operators so that a list of approved devices is available to users of the devices.
It is the operator that retains the responsibility to approve the use and carriage of PED in cargo and it is the operator that will issue any authorisation or approval on the use of PED on their aircraft.
It is recommended that manufacturers of PED that are intended to be placed into, or attached to cargo make contact with operators in advance so that the approval / authorisation can be coordinated. This will avoid the need for multiple individual shippers to seek approval / authorisation for the same device.
Lithium Battery – The term “lithium battery” refers to a family of batteries with different chemistries, comprising many types of cathodes and electrolytes. For the purposes of the DGR they are separated into:
Lithium metal batteries. Are generally primary (non-rechargeable) batteries that have lithium metal or lithium compounds as an anode. Also included within lithium metal are lithium alloy batteries. Lithium metal batteries are generally used to power devices such as watches, calculators, cameras, temperature data loggers, car key fobs and defibrillators.
Lithium metal batteries packed by themselves (not contained in or packed with equipment) (Packing Instruction 968) are forbidden for transport as cargo on passenger aircraft) unless shipped under exemption issued by all States concerned, see Special Provision A201.
Figure 1 – Example of Lithium Metal Cells and Batteries
Lithium-ion batteries (sometimes abbreviated Li-ion batteries) are a secondary (rechargeable) battery where the lithium is only present in an ionic form in the electrolyte. Also included within the category of lithium-ion batteries are lithium polymer batteries. Lithium-ion batteries are generally used to power devices such as mobile telephones, laptop computers, tablets, power tools and e-bikes.
Figure 2 – Example of Lithium Ion Cells and Batteries
Lithium ion batteries packed by themselves (Packing Instruction 965) (not contained in or packed with equipment):
(a) must be shipped at a state of charge (SoC) not exceeding 30% of their rated design capacity. Cells and/or batteries at a SoC of greater than 30% may only be shipped with the approval of the State of Origin and the State of the Operator under the written conditions established by those authorities, see Special Provision A331; and
(b) are forbidden for transport as cargo on passenger aircraft unless shipped under exemption issued by all States concerned, see Special Provision A201.
The technical definition of a battery and cell, as indicated in the UN Manual of Tests and Criteria, is as follows:
Battery means two or more cells which are electrically connected together and fitted with devices necessary for use, for example, case, terminals, marking and protective devices. Units which have two or more cells that are commonly referred to as “battery packs”, “modules” or “battery assemblies” having the primary function of providing a source of power to another piece of equipment are for the purposes of the UN Model Regulations and this guidance document treated as batteries. See definitions for “cell” and “single cell battery”. (See also “Power Banks”)
Button cell or battery means a round small cell or battery when the overall height is less than the diameter.
Cell means a single encased electrochemical unit (one positive and one negative electrode) which exhibits a voltage differential across its two terminals. Under the UN Model Regulations, UN Manual of Tests and Criteria and this guidance, to the extent the encased electrochemical unit meets the definition of “cell” herein, it is a “cell”, not a “battery”, regardless of whether the unit is termed a “battery” or a “single cell battery” outside of the UN Model Regulations, the UN Manual of Tests and Criteria and this guidance.
Consignment, one or more packages of dangerous goods accepted by an operator (airline) from one shipper at one time and at one address, receipted for in one lot and moving to one consignee at one destination address.
Operator, a person, organisation or enterprise engaged in or offering to engage in an aircraft operation.
Overpack, an enclosure used by a single shipper to contain one or more packages and to form one handling unit for convenience of handling and stowage. Dangerous goods packages contained in the overpack must be properly packed, marked, labelled and in proper condition as required by the DGR. (A Unit Load Device is not included in this definition).
Package, (for dangerous goods) the complete product of the packing operation consisting of the packaging and contents prepared for transport.
Packaging, one or more receptacles and any other components or materials necessary for the receptacles to perform their containment and other safety functions and to ensure compliance with the minimum packing requirements of the DGR.
Unit Load Device (ULD), any type of freight container, aircraft container, aircraft pallet with a net, or aircraft pallet with a net over an igloo.
An overpack is not included in this definition.
Watt-hour Rating, expressed in Watt-hours (Wh), the Watt-hour rating of a lithium cell or battery is calculated by multiplying the rated capacity in ampere-hours by the nominal voltage.
FREQUENTLY ASKED QUESTIONS
Part 1 – Questions Related to Definitions
A. What are the various types of lithium batteries?
Lithium batteries fall into two broad classifications; lithium metal batteries and lithium ion batteries. Lithium metal batteries are generally non-rechargeable and contain metallic lithium. Lithium ion batteries contain lithium which is only present in an ionic form in the electrolyte and are rechargeable.
Within these two broad classifications there are many different chemistries. For example within lithium ion batteries there are lithium polymer, lithium iron phosphate (LiFePO4), lithium air to name a few.
B. What is the difference between a lithium cell and a lithium battery?
A lithium cell is a single encased electrochemical unit consisting of one positive and one negative electrode that exhibits a voltage differential across the two terminals. A lithium battery is two or more cells electrically connected. A single cell battery is considered a cell and not a battery for the purposes of the limitations set out in the DGR.
Note: Units that are commonly referred to as “battery packs” or “power banks” having the primary function of providing a source of power to another piece of equipment are for the purposes of these Regulations treated as batteries. Refer to the section on Definitions for complete details.
C. How are component cells connected to form a battery?
Cells in batteries may be connected in parallel, in series, or in a combination of the two. When cells are connected in series, the voltage of the battery increases but the capacity in ampere-hours (Ah) does not change. By contrast, when cells are connected in parallel the capacity in ampere-hours of the battery (Ah) increases but the voltage stays the same.
D. How do I determine the watt-hour rating for a particular lithium ion battery?
The watt-hour (Wh) rating is a measure by which lithium ion batteries are regulated. Section I Lithium ion batteries manufactured after 31 December 2011 and Section IB and Section II Lithium ion batteries manufactured after 1 January 2009 are required to be marked with the watt-hour rating.
You can also arrive at the number of watt-hours your battery provides if you know the battery’s nominal voltage (V) and capacity in ampere-hours (Ah):
Ah x V = Wh
If only the milliampere-hours (mAh) are marked on the battery then divide that number by 1000 to get ampere-hours (Ah) (i.e. 4400 mAh / 1000 = 4.4. Ah).
Most lithium ion batteries marketed to consumers are below 100 watt-hours. If you are unsure of the watt-hour rating of your lithium ion battery, contact the manufacturer.
E. What is a button cell battery?
A button cell battery is a round small cell where the overall height is less than the diameter. Button cells are often referred to as “coin” cells.
Part 2 – Questions Related to Design Type Testing Provisions
A. Where can I find requirements related to testing of battery design types?
The UN Manual of Tests and Criteria sets out specific tests that must be conducted on each lithium cell or battery design type. Each test is intended to either simulate a common transportation occurrence such as vibration or changes in altitude or to test the integrity of a cell or battery. You may obtain a copy of these testing requirements via the following website: http://www.unece.org/trans/danger/publi/manual/manual_e.html.
B. What constitutes a design change requiring renewed design type testing?
The following provisions are taken from the 6th revised edition of the UN Manual of Tests and Criteria, paragraph 220.127.116.11.
A cell or battery that differs from a tested design by:
(a) For primary cells and batteries, a change of more than 0.1 g or 20% by mass, whichever is greater, to the cathode, to the anode, or to the electrolyte;
(b) For rechargeable cells and batteries, a change in Watt-hours of more than 20% or an increase in voltage of more than 20%; or
(c) A change that would materially affect the test results.
shall be considered a new type and shall be subjected to the required tests.
Note: the type of change that might be considered to differ from a tested type, such that it might lead to a failure of any of the test results, may include, but is not limited to:
(a) A change in the material of the anode, the cathode, the separator or the electrolyte;
(b) A change of protective devices, including the hardware and software;
(c) A change of safety design in cells or batteries, such as a venting valve;
(d) A change in the number of component cells;
(e) A change in connection mode of component cells;
(f) For batteries which are to be tested according to T.4 with a peak acceleration less than 150 gn, a change in the mass which could adversely impact the result of the T.4 test and lead to a failure.
In the event that a cell or battery type does not meet one or more of the test requirements, steps shall be taken to correct the deficiency or deficiencies that caused the failure before such a cell or battery type is retested.
C. Who is responsible for testing lithium cells and batteries?
It is the manufacturer of the lithium cell type to have the type tested against the applicable provisions set out in Subsection 38.3 of the UN Manual of Tests and Criteria. In addition where lithium cells are combined together to form a battery, the manufacturer of the lithium battery must have the battery type tested against the applicable provisions set out in Subsection 38.3 of the UN Manual of Tests and Criteria.
Manufacturers of devices that incorporate lithium cells or batteries should seek confirmation from the manufacturer or supplier of the lithium cells or batteries that the cell or battery type has passed the applicable UN 38.3 tests.
Part 3 – Questions related to Packaging and Transport Provisions
A. If I have smaller packages, can I use a smaller lithium mark?
Where the packages are of dimensions such that they cannot bear the full size lithium battery mark, the mark dimensions may be reduced to 105 mm wide × 74 mm high. The design specifications remain otherwise the same.
B. When is a lithium battery mark not required on the package?
A lithium battery mark is not required for packages prepared in accordance with Section II of PI 967 or PI 970 containing only button cell batteries installed in equipment (including circuit boards) or consignments of two packages or less where each package contains no more than four cells or two batteries installed in equipment.
The Air Waybill is only required to contain the statements “Lithium [ion or metal] batteries in compliance with Section II of PI9XX” when the lithium battery mark is affixed to the package(s).
C. Section II in Packing Instructions 967 and 970 states that “the lithium battery mark is not required on consignments of two packages or less where each package contains no more than four cells or two batteries installed in equipment.” What is the intent of this provision?
This provision is to require, where there are more than two packages in the consignment, that each package bears the lithium battery mark, and therefore the air waybill has the compliance statement e.g. “Lithium [ion or metal] batteries in compliance with Section II of PI 9xx [67 or 70]”.
The provision continues to allow for small consignments of one or two packages containing no more than four cells or two batteries installed in equipment per package to move without the lithium battery mark and therefore without the compliance statement on the air waybill.
A consignment is one or more packages of dangerous goods accepted by an operator (airline) from one shipper at one time and at one address, receipted for in one lot and moving to one consignee at one destination address.
D. For the purposes of the lithium battery packing instructions, what is considered the “package”?
The package is the complete product of the packing operation that satisfies the requirements of the packing instruction and in a manner ready to be presented for transport (shipper/consignee information, hazard communication, net quantity of lithium batteries is within limits). The package may contain multiple batteries or pieces of equipment provided the limitations set out in the applicable packing instruction are not exceeded. The package must be marked and labelled as required by the packing instruction.
A “package” may contain multiple boxes that are all placed inside an outer packaging to form a discrete unit for transport provided that the total net quantity of lithium cells or batteries inside the “package” does not exceed 5 kg. Or, one or more packages may then be placed into an overpack for ease of handling or transport purposes. When an overpack is used, the package marks and labels must be duplicated on the overpack unless the marks and labels required on individual packages are visible, or are not required by the packing instruction (i.e. not more than 4 cells or 2 batteries when contained in equipment and no more than two packages in the consignment).
E. Can a single lithium battery mark be used to identify that both lithium metal and lithium ion batteries are contained inside the package?
Yes. The mark may bear all applicable UN numbers, e.g. UN 3091, UN 3481, to identify that the package contains lithium metal batteries packed with, or contained in equipment and lithium ion batteries packed with, or contained in equipment.
F. What are the requirements for the telephone number on the lithium battery mark?
The telephone number should be of a person knowledgeable about the shipment but is not intended to be for the purposes of obtaining immediate emergency response guidance, and is therefore not required to be monitored at all times that the package is in transit. It is acceptable for the number to be monitored during the company’s normal business hours in order to provide product-specific information relative to the shipment. However, it also is acceptable to use an emergency response, 24-hour phone number on the lithium battery mark.
G. Is it acceptable to apply the lithium battery mark to packages that contain only button cells installed in equipment?
Yes, the allowance not to apply the lithium battery mark to packages containing equipment with only button cells is a relaxation from the regulations, not a prohibition. However, if the package(s) bear the lithium battery mark, then the compliance statement must be included on the air waybill, when an air waybill is used.
H. Does IATA require a MSDS or SDS containing the UN test data?
No. IATA does not require a material safety data sheet (MSDS or SDS), or the UN 38.3 test data report as part of the required documentation requirements when offering lithium batteries for transport.
I. May lithium battery packages be placed in an overpack in accordance with the IATA Dangerous Goods Regulations?
Yes. The overpack may also contain packages of dangerous goods or goods not subject to the Regulations provided there are no packages enclosing different substances which might react dangerously with each other. An overpack must be marked with the word “overpack” and must be labelled with the lithium battery mark (DGR Figure 7.1.C), unless the mark(s) on the package(s) inside the overpack are visible or not required by the Packing Instruction.
In addition, the word “overpack” must be marked on overpacks containing packages transported in accordance with Section I of the applicable Packing Instructions (i.e. bearing the Class 9 lithium battery hazard label).
For Section II of PI 965 and PI 968 the shipper is limited to one (1) package per consignment (shipment) and no more than one (1) package complying with the requirements of Section II may be placed in an overpack. This overpack may also contain packages prepared in accordance with Section IA and/or IB of PI 965 and/or PI 968 and/or packages of other dangerous goods and/or packages of non-dangerous goods.
J. Do the quantity limits shown in the lithium battery packing instructions apply to overpacks containing lithium batteries?
The quantity limits shown in the packing instructions refer to the maximum net weight of lithium batteries in each package. Provided each package remains within the limit specified in the packing instruction, there are no limits specified for an overpack.
For Section II of PI 965 and PI 968 the shipper is limited to one (1) package per consignment (shipment) and no more than one (1) package complying with the requirements of Section II may be placed in an overpack. This package may be placed in an overpack. This overpack may also contain packages prepared in accordance with Section IA and/or IB of PI 965 and/or PI 968 and/or packages of other dangerous goods and/or packages of non-dangerous goods.
K. Can I ship recalled, damaged or non-conforming cells or batteries?
Lithium batteries, identified by the manufacturer as being defective for safety reasons, or that have been damaged, that have the potential of producing a dangerous evolution of heat, fire or short circuit are forbidden for transport by air (e.g. those being returned to the manufacturer for safety reasons). This applies also to lithium cells or batteries installed inside equipment such as mobile phones, laptops or tablets where the devices are subject to recall due to the safety concerns of the lithium cell or battery installed in the device.
Batteries which have some other defective feature (e.g. LEDs not showing charge, incorrect model number on label, or batteries not holding enough charge) could still be shipped by air. Also, laptops being returned may not have a defective battery, it may not meet the needs of the customer, may be defective itself (but not the battery), etc. In these situations air transport would be permitted. The battery or equipment manufacturer should be contacted to determine the appropriate shipping method.
L. How do I protect against “inadvertent activation”?
When batteries are contained in equipment, the equipment must be packaged in a manner that prevents unintentional activation or must have an independent means of preventing unintentional activation (e.g., packaging restricts access to activation switch, switch caps or locks, recessed switches, trigger locks, temperature sensitive circuit breakers, etc.). This requirement does not apply to devices which are intentionally active in transport (RFID transmitters, watches, sensors etc.) and which are not capable of generating a quantity of heat sufficient to be dangerous to packaging or personal safety.
M. I am shipping perishable and/or pharmaceutical cargo with lithium battery powered temperature or data loggers do I need to follow the Dangerous Goods Regulations?
Yes. All the applicable provisions for lithium batteries will need to be followed by the shipper of such devices, including the limitations for devices that are active during transport.
The Perishable Cargo Regulations (PCR) and/or Temperature Control Regulations (TCR) also apply to such shipments.
N. Does the definition of “consignment” apply to the house air waybill (HAWB) or to the master air waybill (MAWB)?
The use of HAWB or MAWB has no direct relationship to what is a “consignment”. For example a MAWB may have multiple consignments where each of the consignments are from separate shippers, or are from one shipper but to separate consignees, or the MAWB may be just be a single consignment from one shipper to one consignee.
The following limitations apply to consignments:
1. a shipper is not permitted to consign more than one package of Section II, PI 965 or PI 968; and
2. a shipper is not permitted to consign more than two packages of lithium batteries contained in equipment under Section II of PI 967 and PI 970 where there are no more than 4 cells or 2 batteries in the package without the application of the lithium battery handling label (lithium battery mark) on the package.
The objective of these two conditions is to:
1. restrict the number of packages of just lithium batteries that are carried by air that are not subject to the dangerous goods acceptance check and that are not shown on the written information to the pilot-in-command. The intention here is to force shippers of multiple packages to declare these on a Shipper’s Declaration for Dangerous Goods and therefore make the consignment subject to the full checks for air transport.
2. require appropriate hazard communication on packages and on the air waybill where a shipper has more than two packages of lithium batteries contained in equipment.
1. This does not mean that every retail “package” must bear the lithium battery mark. A shipper may place multiple retail boxes, each containing a lithium battery meeting Section II installed in equipment, into an outer packaging to form the package for air transport. There is no limit on the number of individual retail boxes that can be placed into the outer packaging, except that a “package” must not contain more than 5 kg net weight of lithium batteries. Each such package must bear the lithium battery mark and when an air waybill is used the air waybill must show the applicable compliance statement, e.g. “lithium ion batteries in compliance with section II of PI 967”.
2. Shippers or freight forwarders should not try to split a consignment across multiple air waybills to try to avoid the application of the lithium battery mark where there are more than two packages with lithium batteries contained in equipment under Section II in a consignment.
O. Are consignments that contain just Section II lithium batteries subject to a dangerous goods acceptance check by the airline or their ground handling agent?
No, the provisions in the lithium battery packing instructions for Section II do not include the dangerous goods acceptance check as one of the provisions that apply. Any decision on performing an acceptance check of packages that contain Section II lithium batteries is the airlines’. Dangerous goods acceptance are only legally required for fully regulated, Section I lithium batteries.
P. I am placing a data logger inside an aircraft unit load device (ULD) to monitor the temperature during transit. Do I need to place a lithium battery mark on the ULD?
No, If the data logger is not inside a package or overpack, the marking provisions of the DGR do not apply. It is only packages and overpacks that require marks and labels. Shippers must not attach marks and labels to ULD’s.
Further information can be found here:
You may also contact the airline of your choice or your national civil aviation authority if you have any further concerns on the use or carriage of data loggers containing small batteries that are active (on) while in transport.
You can also contact the IATA Dangerous Goods Support team if you have questions or concerns which may not have been addressed in this document: firstname.lastname@example.org